Description
What’s a home fire alarm
Smoke alarm monitors the concentration of smoke to prevent fires. The internal use of ion-type smoke sensor is widely used in various fire alarm systems, and its performance is far better than that of gas-sensitive resistance fire alarms.
The stand-alone smoke detection alarm uses photoelectric smoke or ion smoke detection technology, which can send out an alarm directly after detecting a fire at an early stage, reminding the on-site personnel to promptly call the police and evacuate in time, which is to prevent and respond to the death of people in various places. “Effective technical means for disasters.
Features of Smoke alarm
The stand-alone smoke fire detection alarm can detect the early characteristics of a fire, send out a fire alarm signal, and provide instructions for evacuation and prevention of fire.
Main Features of Home Fire Alarm
1. Loud 85-decibel siren with LED flashing.
This Home Fire Alarm sounds a loud 85-decibel siren with red LED flashing that is designed to wake even the soundest of sleepers.
Test/reset button allows you to silence alarms and test if the device is working.
Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
Red LED : When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
.2.Battery Operated , Easy Installation
3 x 1.5V AA Batteries are required. Green and red LED lights that indicate normal operation and alarm status. It can be mounted easily on ceilings and walls without requiring an electrician. A beep sounds every 30 seconds, indicating that the battery is low , green LED flashes every 30 seconds.
3. Simple Design, Wide Application
The ultra-thin design features a white finish that blends seamlessly with most home decor. Widely used for bedroom, kitchen, living room and any other area where a risk of leakage is exposed.
The specification of Home Fire Alarm
Home Fire Alarm
UL approval 10 years battery smoke alarm
Photoelectric chamber for easily detect
Big test button for easy operation
Loud>85dB(A)alarm signal @3M
Low battery detect
Fault warning
Easily install with mounting bracket
