What is the use of slow close toilet seat

1. The toilet lid can effectively prevent the odor from overflowing, so as not to affect the living environment; 2. Cover the toilet lid to prevent germs and microorganisms from being carried into the air by the cyclone when pumping water, so as to prevent the towels and toothbrushes from being contaminated by bacteria; 3. Use the toilet Cover, this is a manifestation of personal qualities, which can avoid unnecessary embarrassment.

Second, how to clean the slow close toilet seat

1. The toilet lid itself is a plastic product. It is easy to turn yellow after long-term use, so it is more difficult to clean. A good cleaning method is to remove the toilet lid and soak it in anti-theft salt water or detergent for a period of time and then clean it.

2. We can also use alum to soak for a period of time. The cleaning effect obtained is very good. There are many reasons for the yellowing of the toilet. The yellowing speed is very fast under the influence of ultraviolet rays, and the light in the bathroom needs to be blocked.

3. We can re-dissolve a little chlorine-based bleach with hot water. After standing for a while, scrub with a brush. Dip the darkened part with metallic brightener, scrub with a toothbrush, and then rinse with clean water.

4. The flush toilet produces yellow dirt, which is difficult to clean with a brush. You can tie waste nylon stockings to one end of the stick, dip it in a foaming detergent, and wash it once a month to keep the toilet white for a long time.

5. Put an appropriate amount of water in the toilet first, then pour 5-10 ml of detergent or hydrochloric acid solution, apply evenly with a brush and then scrub. If the dirt is heavy, you can pour a little detergent soak and scrub until it is clean.

How to choose the slow close toilet seat

What kind of toilet cover is suitable for your own toilet? It is too big or too small. It is best to consult professionals to obtain a suitable selection. All you need is:

1. Determine whether the toilet is locked or unlocked. If you don’t know, you can take a side view of the toilet and show it to the store.

How to replace the slow close toilet seat if it is broken

How to replace the toilet lid if it is broken

2. Determine the shape of the toilet. If you don’t know, you can take a top view of the toilet and show it to the store.

How to replace the toilet lid if it is broken

3. Measure the size of the toilet: length, width, hole distance, box distance. If the end of the toilet has a curvature, the width of the end must be measured to prevent the end of the newly purchased toilet lid from being stuck and unable to open and close.

1. Hole distance: is the distance between the two mounting holes at the end of the toilet

2. Length: is the distance from the center point of the hole to the front end of the toilet

3. Width: the distance from the center of the length to both sides of the toilet

4. Tail width: the length of the toilet hole distance extended to both sides of the toilet

5. Box distance: the vertical distance between the installation hole and the toilet tank

Note: After measuring these data, you can also measure the size of the mounting hole. The diameter of the mounting hole is between 14-17 mm. You can use the lock to install the toilet lid.

How to take off slow close toilet seat if it is broken

Report the size of the above toilet to the store, and the professional store can recommend a suitable toilet cover for you.

The specification of slow close toilet seat

Model No.:LZ-2004 slow close toilet seat

white plastic toilet seats – round and elongated，each 2000pcs, please quote each with and without soft-close
–PP round shape， one button quick release ,SOFT CLOSE AND NON SOFT CLOSE,n.w：1.1kg PP