Description
This Best Carbon Monoxide Detector smoke by a couple of infrared diodes. The principle of detecting is granule in the smoke can reflect infrared light. Infrared diodes are placed in the special chamber. The chamber can shield exteral light, but doesn’t affect the smoke into it. While there is no smoke, the diode can receive very weak infrared light. When the smoke entering the chamber, diode can receive more and more light, and the detector can give out alarm signal when the smoke attains the certain density. In order to reduce the interference and lower power consumption, the emitting circuit adopts the pulse signal. The photoelectric smoke detector in accordance with the networking approach is divied into 2-wire and 4-wire photoelectric smoke alarm.
Product Range of Best Carbon Monoxide Detector
Addressable fire alarm system
Wireless alarm system
Electrical fire monitor system
Extinguishing control system
Fire door monitor system
Standalone smoke detectors and combustible gas detector
4-wire smoke detectors with relay output.
Should avoid install the Best Carbon Monoxide Detector in the following locations
Passages and other places with high wind velocity; places with water mist or dripping water; places near the stove that are easily contaminated by oil fumes, steam, etc. or high temperature environments (such as directly above the stove); places that are blocked by other objects (such as in cabinets) .
How to install the Best Carbon Monoxide Detector
At the selected wall position, make two hole marks on the two mounting holes on the random mounting plate (the hook on the plate should be horizontally upward); punch the mounting holes, put in the random installation rubber plug, and then use the random Tighten the screws to fix the mounting plate on the wall; align the three holes on the back of the body with the fixing hooks on the mounting plate and hang the body; after connecting the relevant output signal lines, turn on the power.
Specification of the Best Carbon Monoxide Detector
| Model NO. | LZ-838-11 |
| Working voltage | AC110-230V |
| Rated power | ≤3W (AC230V power supply) |
| GAS alarm concentration | 10% LEL |
| CO alarm concentration | comply with EN standard |
| Sound pressure of buzzer | ≥85dB/m |
| Ambient temperature | -10℃～+50℃ |
| Alarm mode: | sound and light alarm/network alarm/solenoid valve output |
| Executive standard | EN61000-6-1: 2007 |
| EN61000-6-3: 2007+A1:2011 | |
| EN50291-1: 2010+A1: 2012 | |
| EN5029-2: 2010 |
