Leaky faucets are a problem that every household can encounter, and if they are not solved in time, not only are they a waste of water but if they are not detected in time, the consequences can be disastrous.
How to repair a leaky tap: The first thing to do is turn off the water supply. You can turn off the water supply by simply turning off one of the supply valves near the tap, but if not every faucet is equipped with a supply valve, you will have to turn off the main supply valve to turn off all the water supply to your home.
1. some taps do not have a leaky spout: This happens when the pivot gasket inside the fixture is worn. The solution: select the corresponding pliers according to the size of the tap to unscrew the tap gland, and use the clips to remove the worn shaft gasket, and then replace it with a new auxiliary gasket to solve the problem.
Leakage at the joints of the tap receiver: check if the nut on the receiver is loose. The solution is to tighten the nut or replace it with a new U-shaped gasket.
Reason for the leak in the lower seam of the tap: This is caused by wear on the gland’s triangular gasket. You can turn the screws loose to remove the tethered head, loosen the gland, remove it, and then take out the triangular seal inside the gland and replace it with a new one.
Common problems with leaky faucet.
Q: Why does the tap still leak even though I’ve replaced the whole faucet?
A: Some leaks have nothing to do with the tap itself and can be caused by improper installation of the water supply hose to the faucet itself. Also, the upper hose supplying water to the fixture may be aged, unstable, or corrupted. Problems such as cracks and bursts in the water supply hose can also have serious consequences. Therefore, experts recommend checking or replacing the water supply hose every 1-2 years or so.
Q: What issues should I pay attention to when repairing a leaky faucet?
A: If you repair it yourself, the first thing you should do is turn off the water supply. You can turn off the water supply by simply turning off one of the supply valves near the tap, but if the house is not equipped with a supply valve for each fixture, you will have to go and turn off the main supply valve to turn off all the water supply. If it is difficult to find the leaky tap’s cause, you can have the tap dismantled and parts replaced by a professional mechanic.
Q: How should I use the taps correctly in general?
A: Some people like to tighten the tap every time they use water, thinking that this will prevent leaks. The fixtures’ correct use should be as gentle as possible, do not turn the tap knob vigorously and repeatedly, and not turn the tape too tightly. Besides, the tap should not be knocked against hard objects as much as possible. For the use of bathtub taps, the metal hose of the showerhead should be kept in a natural stretching state and should not be coiled around the tap when not in use.
Related post:
